For all 4-stroke and 2-stroke engines with separate and mixture lubrication. Can be used with wet multi-disc clutches. Recommended dosage at every oil change or, with 2-stroke engines, at every refueling. 4-stroke engines: 30 ml per liter of motor oil or with wet clutch 20 ml. 2-stroke engines with separate lubrication: 20 ml per liter of 2-stroke oil or with mixture lubrication: 10 ml per 10 l of mixture.

Application:

 

Recommended dosage at every oil change or, with 2-stroke engines, at every refueling. 4-stroke engines: 30 ml per liter of motor oil or with wet clutch 20 ml. 2-stroke engines:-with separate lubrication: 20 ml per liter of 2-stroke oil -with mixture lubrication: 10 ml per 10 l of mixture.

State-of-the-art, ash-free combination of agents with acceleration-enhancing, cleaning, dispersing and material-protecting properties. The product has been formulated using state-of-the-art additive and fuel technologies in accordance with the requirements of today’s engines, fuels and running conditions. Ensures increased driving enjoyment due to optimised performance. The engine starts easier and also runs smoother.

• good corrosion protection
• residue-free combustion
• guarantees optimum combustion
• improves the acceleration
• removes deposits from entire fuel system
• highly economical
• prevents carburettor icing
• higher performance gain

Areas of application

For 2-stroke and 4-stroke gasoline engines (aspirated and injection).

Application

Add to the fuel tank. For the optimum effect, add every time you refuel. Fully compatible with all gasoline grades. 80 ml is sufficient for up to 10 litres of fuel.

Dispersion for sealing leaks in coolant circuits. The product reliably seals hairline cracks and small leaks. Can be used as a preventative measure when repair work has been carried out on the cooling system. The solids dispersion is stabilised in carrier fluid.

• compatible with conventional coolant water refiners and antifreeze
• permanently and reliably seals hairline cracks and small leaks
• no harmful side effects
• suitable for aluminium radiators

Areas of application

For sealing minor leaks in coolant systems with and without coolant filter. Also suitable for aluminium andplastic radiators.

Application

Shake well before use. Add contents to the cold cooling system. Then drive the vehicle for at least 10 minutes. Contents will treat up to 5 litres of coolant.

Comment

The treated product contains biocidal products as preservative. Contains Mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one [EC No 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC No 220-239-6] (3:1).

Preserves and protects fuel against ageing and oxidation. Prevents corrosion throughout the entire fuel system. Prevents problems from occurring when motorbikes, motor scooters, ATVs, snowmobiles and other gasoline-driven 2-stroke and 4-stroke engines are decommissioned. Increases operational reliability.The product has a lasting effect.

• has a lasting effect
• increases operational reliability
• simple to use
• tested for catalytic converters
• cost-effective due to exact dosage
• protects fuel against oxidation and ageing

 

Areas of application

Suitable for all 4-stroke and 2-stroke gasoline engines – especially for preventive care. Tested for turbochargers and catalytic converters.

Application

Filling the dosage chamber (25 ml) once is sufficient for 5 litres of fuel. Add to the fuel and repeat dosage after refuelling. Also suitable for long-term use in seldom used engines. When decommissioning, add to the fuel and let the engine run approx. 10 minutes.

Additives are vitamins for the engine. It won’t work without them. They ensure cleaning and corrosion protection, for stable lubrication and temperature resistance. Even simple mineral motor oils, which no longer come close to meeting the requirements of today’s motors, are up to 15% additives. Modern oils, such as fully synthetic motor oils, are even up to 30%. What you may not already know is every time you fuel your motorcycle, you add additives. For modern fuels are packed with additives, in order to increase the knock resistance of petrol, for example.

With LIQUI MOLY additives you protect your motor, reduce your fuel consumption and save cash. Our oil additives clean the motor from the inside, minimize friction and wear, reduce oil consumption and protect against corrosion. They are suitable for both petrol and diesel motors and help to recreate the original performance of your motorcycle’s engine. Our fuel additives for petrol motorcycle engines keep the entire fuel system clean and guarantee optimum combustion and compression.

All of our additives have a common benefit: They help to clean and care for the entire motor and fuel system. And they help increase the life span of the motor and reduce fuel consumption. This means the use of additives not only benefits your wallet, but also the environment.

• Optimizes engine performance
• Prevents corrosion in the fuel system
• Reduces residues
• Environmentally friendly
• Tested for catalytic converters
• Increases operational reliability
• For carburetor and fuel-injection engines
• Highly economical
• Reduces the risk of knocking combustion
• Normalizes gasoline consumption and exhaust emissions values
• Cat tested
•  Add to fuel in all 4-stroke engines (carburetor or injection)

 

125 ml Motorbike 4T Bike-Additive is sufficient for 15 to 20 litres of fuel. Add every time you fill up.